Pillow Block Bearings

Contact Now

Pillow Block Bearings Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations.Pillow block bearings are a typical style of bearing. These bearings are composed of a self-aligning ball bearing (the commonly used type) and plummer block. They can be attached to a shaft by fastening a ball retaining screw.

 

 

Pillow block bearings, sometimes referred to as plummer block bearings, are mounted bearings that are used to provide load support for a rotating shaft. Their mounting surface is on a plane parallel and offset to the axis of the shaft. Mounting holes or slots in the base or feet of pillow block bearings permit adjustment and easy mounting.

 

 

 

2.188 Inch | 55.575 Millimeter x 4.02 Inch | 102.108 Millimeter x 3 Inch | 76.2 Millimeter QM INDUSTRIES QVVPA13V203SET Pillow Block Bearings

-40 to 120 ºC 360 mm
10.6 N/A

3.543 Inch | 90 Millimeter x 4.03 Inch | 102.362 Millimeter x 3.74 Inch | 95 Millimeter QM INDUSTRIES QMPR18J090SEO Pillow Block Bearings

Angular Contact Ball 4.921 Inch | 125 Mil
Single Row | Angular 5.844

3 Inch | 76.2 Millimeter x 3.62 Inch | 91.948 Millimeter x 3.5 Inch | 88.9 Millimeter QM INDUSTRIES QMPX15J300SM Pillow Block Bearings

0.0 7.244 Inch | 184 Mil
Triple Lip Labyrinth Yes

3.15 Inch | 80 Millimeter x 4.03 Inch | 102.362 Millimeter x 3.74 Inch | 95 Millimeter QM INDUSTRIES QMPR18J080SO Pillow Block Bearings

19.125 Inch | 485.77 18.3 Inch | 464.8 Mi
Cast Steel 4 Bolt Pillow Block;

3 Inch | 76.2 Millimeter x 3.62 Inch | 91.948 Millimeter x 3.25 Inch | 82.55 Millimeter QM INDUSTRIES QMPF15J300SEO Pillow Block Bearings

Double Row | Normal ZNT9
0698210715977 Inch
1/11